Certificate for our glitters
 
  The following information is relative to the composition of our PVC Flake glitter products:
   
 
1). Base Material-Structure
A). 1.4 mil P.V.C. Film
CAS# 25085-82-9
Chemical Name: Polyvinyl Chloride
B). The above P.V.C. film, which is 1.4 mil thick is vacuum metallized on both sides with aluminum CAS# 7529-90-5.
  Note: The amount of aluminum vacuum deposited is an immeasurable quantity. It is approximately 121.9 angstoms in thickness. In terms of weight, 100 lbs. of 1.4 mil P.V.C. would have .12 lbs. of aluminum metallization total on both sides. The Film used contains no Pthalates.
   
  2). Total Structure
 
P.V.C. FILM CAS# 25085-82-9 95.40%
ALUMINUM CAS# 7529-90-5 . 11%
ACRYLIC CAS# 28263-96-9 3.24%
*PIGMENT (VARIOUS) 1.25%(VARIOUS) 1.25%
   
  *MAXIMUM VALUES:
 
  *PIGMENTS (AS REQUIRED)
  1. YELLOW 5567-15-7
  2. BLUE 147-14-8
  3. BLUE 147-14-8
  4. RED 17852-99-2
  5. RED 5160-02-1
  6. RED 6424-77-7
  7. RED 99402-80-9
  8. VIOLET 6358-30-1
  9. VIOLET 67989-22-4
   
  The below listed colors use the following pigment combinations.
 
LIGHT GOLD 1, 4
RED 5, 6, 9
BLUE 2, 4
GREEN 1, 3
PINK 1, 4
FUSCHIA 7
PURPLE 7, 8, 9
DARK GOLD 1, 4
BRASS GOLD 1, 4
  This is the total information we are able to disclose regarding our PVC Flake.
 
  SUBJECT: HEAVY METALS CERTIFICATION CONEG LEGISLATION
 
  This letter is in response to your request concerning our compliance with CONEG. In accordance with CONEG's directives, we have evaluated your products for the presence of lead, cadmium, hexavalent chromium and mercury.
 
  This is to assure you that our product fully complies with all state legislation restricting the above heavy metals.
  This product does not contain any intentionally added metals or heavy metal compounds; any heavy metal that may be present in this product result from their presence as tract impurities in the raw materials used to manufacture the product. Such metals in the product, if any, falls well within the limitations set forth in the Model Toxic Legislation adopted by the Source Reduction Council of CONEG, as adopted by the individual sales.
 
  The information concerning concentrations of these impurities, if any, is as follows:
 
CS-5684 HMR Containing less than 100 ppm total of lead, cadmium, mercury and hexavalent chromium.
   
  All of the ingredients in our PVC Flake appear on the TOSCA list, and are included in the Canadian CEPA Domestic Substances list.